No products in the cart.


Electro Voice EVC-1082-96W 8″ 90 x 60 Indoor black Speaker

Rp 28.329.000 Rp 22.663.200

In stock

SKU: EVC-1082/96-BLK Categories: , , , Brand:



8″ speaker 90×60

  • 8-inch, two-way loudspeaker, with 90˚ x 60˚ constant directivity, rotatable waveguide.
  • Power rating: 200 W Continuous, (800 W Peak).
  • Passive system: 91 dB, 120 dB maximum
  • Gland nut cover and stainless steel grille on PI versions.
  • Optional high quality transformer and patented Automatic Saturation Control (ASC) preserve low end over 70V/100V lines

EVC loudspeakers from Electro-Voice are two-way systems that can be used in a broad range of applications where wide bandwidth, vertical and horizontal directivity control, and high efficiency are required in a compact, cost-effective package. EVC loudspeakers are voiced to complement other EV-Innovation models (EVFEVHEVA, and EVU).

The high frequency section of EVC loudspeakers comprises a single 1¼-inch pure titanium dome compression driver directly coupled to a rotatable constant directivity waveguide that delivers uniform pattern control and smooth, linear response. The low frequency section employs a high-output woofer that was developed using state-of-the-art, computer aided optimization to provide low distortion, high efficiency, and maximum intelligibility at high sound pressure levels. The passive crossover implements a modified fourth-order design with slopes of 24 dB per octave for smooth off axis response and improved definition through the critical vocal range.

The EVC series is an extremely cost-effective solution for many fixed-install applications. The enclosures are constructed of 15-mm plywood and finished with EVCoat for enhanced durability. The loudspeakers have been designed with multiple M10 suspension points as well as attachment points for an optional U-bracket or multi-mount style pan/tilt wall mount. All EVC series loudspeakers accept wire gauges up to 10 AWG (6 mm). The input panel also accepts optional covers with NL4-type connectors or weatherized gland-nuts.

For 70V/100V operation, the input panel has an internal landing pad for mounting EV’s high-quality TK-150 audio transformer. Adding a TK-150 to the EVC input panel engages EV’s patented Automatic Saturation Compensation (ASC), which preserves low frequency performance while presenting a stable load to the amplifier regardless of how many loudspeakers are connected in parallel. An EVC loudspeaker with a transformer installed sounds virtually identical to the same model without a transformer.


Max Calculated SPL 120dB
Rotatable coverage 90° x 60°
Frequency Range (-10 dB) 55Hz-25kHz


Shipping Weight 28lbs (12.7kg)
Weight Net 24.69lbs (11.2kg)
Suspension eight M10 Suspension Points, optional U Bracket or pan/tilt wall mount
Grille 18 GA cold-rolled steel with rotatable logo (18 GA stainless steel with hydrophobic cloth on PI models)
Minimum Impedance
HF Transducer DH-2005
LF Transducer EVS-2008
Frequency Response (-3 dB) 75Hz-21Hz
Environmental Specs IEC 60529, IP44 (IP55 for PI versions)
Nominal Impedance
Axial Sensitivity (SPL, 1 W @ 1 m) 91dB
Power Handling (Continuous / Peak) 200/400/800W
Connectors Dual four-pin 10 AWG (6 mm) Phoenix/Euro Block screw-terminals
Enclosure 15mm weather-resistant plywood with EV Coat
Color Black or White
Dimensions (H x W x D) 492 x 248 x 277mm
Passive crossover frequency 1.8kHz
Rec. high-pass frequency, 4th Order 50 Hz for 8Ω (50 Hz with TK-150 transformer)

Additional information

Weight 13 kg

Dalam proses.

Leave a Reply

Your email address will not be published. Required fields are marked *

Kategori Produk
Kategori Produk