Eight Stellar Stereo Reverbs — Zero Learning Curve
The Immerse Mk II raises the bar with eight rich stereo reverbs in one easy to use pedal. No user manual required. Experience studio-quality tone that can be used with instruments of all stripes.
Features
- High-quality buffered bypass, perfect for placing at the end of the signal chain
- Trails switch
- Kill Dry switch for parallel effect loops
- Inputs/outputs can be used mono (#1) or stereo (#1 and #2)
- Analog dry signal for low noise and zero latency
- Small, pedalboard-friendly footprint
- Requires standard 9V pedal power supply (not included)
- Designed and manufactured in California USA
Effects
The Immerse Mk II is packed with eight versatile reverb effects:
- W3T (Wet v3) — Our flagship reverb algorithm is smoother and more three-dimensional sounding than ever before. With adjustable pre-delay, it enhances what you play without covering it.
- Plate – Bright and diffuse like a studio plate reverb.
- Hall – The lush, open sound of a concert hall with adjustable modulation depth for achieving deep modulated tones.
- Spring – The distinctive twerp of a tube-driven spring reverb. With adjustable modulation speed, it can achieve a vibrato-spring sound.
- Sustain – A new algorithm built on the W3T reverb. This magical, versatile effect can be configured as a sustainer or infinite reverb.
- Echo – Combining the W3T reverb with stereo echo.
- Detune – Adds a detuned double of the dry signal with reverb. The blend control adjusts the amount of detune vs. detuned reverb.
- Shimmer – Reminiscent of a synth pad that follows what your instrument plays, this effect combines the best qualities of our previous shimmers.
Controls
- Effect Select
- Mix, from 100% dry to 100% wet
- Reverb Depth ( Echo Repeats)
- Effect Dependent Control 1
- Tone (Wet, Plate, Hall, Spring, Shimmer, Detune)
- Echo Time
- Hold Time (Sustain)
- Effect Dependent Control 2
- Pre-Delay (Wet, Plate)
- Modulation (Hall, Spring, Sustain)
- Reverb-to-effect Blend (Echo, Detune, Shimmer)
Specifications
Electrical
Input level | instrument / consumer line level |
Input impedance | 1 MΩ |
Frequency response | 20 Hz—30 kHz |
Total harmonic distortion | < 0.01% |
*See User Guide for complete specifications.
Power
Input | 9-12 V DC, 100 mA |
Connector | center-negative, 5.5 mm OD x 2.1 mm ID |
Physical
Dimensions | 2.6” x 4.6” x 1.9” / 63 mm x 115 mm x 46 mm |
Weight | 6.7 oz / 190 g |