JBL PRX 735
OUT OF STOCKCONTACT US!
JBL PRX 735
15″ Three-Way Full-Range Main System
The PRX735 is a self-powered, lightweight three-way loudspeaker system capable of delivering a very high level of performance over a broad bandwidth.
- 136 dB peak SPL
- 15″ Differential Drive® low-frequency driver for low-distortion and higher SPL
- 165 mm (6.5 in) horn loaded midrange transducer
- 1.5″ diameter next generation JBL neodymium compression driver
- JBL designed waveguide for accurate coverage
- Efficient Class-D amplifier technology
- Normal and Boost user selectable EQ presets
- DSP input section, crossover, dynamic limiting, component optimization, selectable system EQ
- Line level and direct microphone input capability
- Professional XLR-1/4″ combination inputs, RCA inputs, and XLR loop-through
- Multiple injection molded handles with backing cup for easy transport
- Integrated M10 suspension points for easy setup
- Lightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by JBL’s tour proven DuraFlex™finish.
- Cloth backed, dent-resistant 16 gauge steel grilles
- This speaker is ideally suited to applications where the program material exhibits subtlety and nuance. Perfectly capable of reproducing high fidelity full range sound without a subwoofer, when coupled with the extended low frequencies of the PRX718XLF, complete control over the entire audio spectrum is attained. As with all the full-range PRX700 Series systems, two EQ selections can be used to optimize the system for the program material and/or environment. The input section also accommodates either Line or Mic/Instrument level inputs.
- The PRX735 is a self-powered, lightweight three-way loudspeaker system capable of delivering a very high level of performance over a wide bandwidth. The PRX735 is comprised of one 15 in 275G Differential Drive® woofer, a 165 mm (6.5 in) 196H horn-loaded mid-range and a 2408H-2 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted to a 90° by 50° horn, all driven by a 1500 watt Audio Class-D power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization.
- All PRX700 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX700 Series cabinets are protected by JBL’s tour proven DuraFlex™ finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of
1000 lbs. each.
- The amplifier input panel offers XLR or ¼ inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and overload lights indicate the system status and assist in setting the optimum level via the level control knob.
|Power Rating||1500 W|
|AC Power Input||100V – 240V~ 50/60 Hz|
|Frequency Range (-10 dB)||Normal: 35 Hz – 20 kHz
Boost: 34 Hz – 20 kHz
|Frequency Response (±3 dB)||Normal: 42 Hz – 20 kHz
Boost: 39 Hz – 20 kHz
|Coverage Pattern||90° x 50° nominal|
|Directivity Index (DI)||10.5 dB|
|Directivity Factor (Q)||11.2|
|Crossover Frequency||480 Hz, 2.0 kHz|
|Maximum SPL||Normal: 136dB
|Signal indicators||Limit: Yellow LED indicates peak output has been reached and dsp
limiter is acting
Signal: Green LED indicates signal present
Power/Standby: Blue indicates system has power and ready to pass audio,
Red indicates system has power but is in a power saving mode and will not
|Dynamic Control (Input)||dbx Type IV™ limiter circuit|
|Input Impedance||20K Ohms (balanced), 10K Ohms (unbalanced)|
|LF Driver||1 x JBL 275G 380mm (15 in) woofer|
|MF Driver||1 x JBL 196H 165mm (6.5 in) horn-loaded midrange transducer|
|HF Driver||1 x JBL 2408H-2 37.5 mm (1.5″) annular polymer diaphragm, neodymium compression driver”|
|Enclosure||Trapezoidal, 18 mm, plywood|
|Suspension / Mounting||12 x M10 Suspension Points|
|Transport||2 x integrated handle with injection molded backing cup|
|Finish||Obsidian DuraFlex™ finish|
|Grille||Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.|
|Input Connectors||2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA input|
|Output Connector||1 male XLR balanced output|
|Dimensions (H x W x D)||952.5 mm x 445.0 mm x 537.97 mm
(37.5 in x 17.52 in x 21.18 in)
|Net Weight||34.9 kg (77 lb)|