15 in. Two-Way Loudspeaker System
The JRX115i is an economical, suspendable, fifteen-inch, two-way speaker system designed for installation where ground stacking or pole mounting is impractical or undesirable.
- 15 in low frequency driver with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more cross-sectional wire area in the voice coil gap than # round wire designs, for greater efficiency and power handling.
- Ferro-fluid cooled compression driver with titanium diaphragm improves high frequency performance as well as system reliability.
- The advanced network topology crossover design shapes the frequency response to deliver coherent summation in the crossover region.
- High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating.
- Progressive Transition™ highfrequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.
- The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance.
- SonicGuard™ protects the highfrequency driver from excess power without interrupting the performance.
- Attractive 18-gauge perforated, steel grille protects components from damage.
- Cabinet is fitted with three M10 threaded suspension points.
- Rigging hardware kit containing three 10 mm forged shoulder eyebolts with washers is included.
Power Rating | 250 W / 1000 W | |
Frequency Range | 38 Hz – 16 kHz (-10 dB) | |
Dimensions (H x W x D) |
686 mm x 470 mm x 432 mm (27 in x 18.5 in x 17 in) |
|
Frequency Response | 50 Hz – 12.5 kHz (±3 dB) | |
Sensitivity | 98 dB SPL (1w/1m) | |
Nominal Impedance | 8 ohms | |
Recommended Amplifier Power | 250 W to 500 W into 8 ohms | |
Maximum SPL | 128 dB | |
Nominal Dispersion | 90º x 50º | |
Crossover Frequency | 1.6 kHz | |
Weight | 27.4 kg (60.5 lb) | |
High Frequency Driver | JBL 2412 1 in exit compression driver mounted on Progressive Transition™ Waveguide |
|
Low Frequency Driver | JBL M115-8A | |
nput Connectors | Neutrik® Speakon® NL-4 (x1); .25 in TS phone jack (x1); parallel |