0;

No products in the cart.

20%

Grace Design M903 Monitor Controller And Headphone Amplifier With Remote

Rp 32.245.056

Rp 1.861.248
Rp 30.383.808
SKU: GRD11040002xGRD13180001 Categories: , , , Brand:

Description

Grace Design M903 Monitor Controller And Headphone Amplifier

Replacing the venerable m902, the Grace Designs m903 is a stereo reference headphone amplifier and monitoring controller housed in a sleek 1U half-rack enclosure. The m903 is designed to provide audio pros with an exceptional headphone amp along with stereo mains monitoring, whether from an analog or digital stereo source. The m903 accommodates these different sources with rear panel XLR and RCA jacks, and both +4dBu and -10dBV sources are easily managed. A pair of stereo TRS outputs allow two pairs of headphones to be driven by the m903. AES3, S/PDIF, and optical digital sources are accepted via rear-panel XLR, RCA and TOSlink connectors respectively. Plus, there’s a USB port allows you to pump your favorite pleasure-listening tunes through the m903 for a true audiophile listening experience.

But the m903 doesn’t stop there. Two pairs of line outputs (balanced and unbalanced) on the rear panel allow the m903 to act as a high-end monitor controller and system preamp. High-current transimpedance output amps can drive even the lowest impedance headphones, and a front panel rotary encoder provides precision level control of both headphone and line output levels, with level adjustments made in 0.5dB steps within a 95dB range.

Grace Designs m903 Headphone Amp/Monitor Controller Features at a Glance

  • Balanced and unbalanced analog inputs
  • 24bit/192kHz digital stereo inputs- AES3, S/PDIF, TOSlink and USB
  • High speed USB interface – completely asynchronous transfer mode allows for bit-perfect playback with zero interface induced jitter
  • Driverless operation on Windows & Mac up to 96kHz/24bit
  • Supports USB Class 2 audio specification for 192kHz/24bit operation on Windows & Mac (drivers needed for 192kHz operation under Windows)
  • New generation DAC’s and ultra low noise balanced current to voltage converter yields more musical performance compared to the m902
  • Mono mode for checking mix phase issues (or listening to Pet Sounds)
  • s-Lock phase lock loop sample clock regeneration for ultra-low jitter and rock solid digital stability
  • High-current transimpedance headphone amplifier circuitry built to effortlessly drive low impedance headphones
  • Balanced and unbalanced variable level analog line outputs
  • Improved power supply architecture isolates headphone power amplifiers, line amplifiers, DAC’s and digital logic
  • Precision level control with a 99.5dB range in 0.5dB steps
  • Channel level matching accuracy of 0.05dB
  • Improved x-feed circuit eliminates perceived loss of low frequency content
  • With infrared remote control available
  • Internal linear power supply with custom wound toroidal transformer
  • Sealed gold contact relays used for all signal switching

Grace Design A903 Specs

  • Number of Channels 2
  • Input Connectors 1 x Balanced XLR Analog Input (2 Jacks, L/R)
  • 1 x Unbalanced RCA Analog Input (2 Jacks, L/R)
  • 1 x XLR AES Digital Input
  • 1 x Optical TOSLINK Digital Input
  • 1 x RCA S/PDIF Digital Input
  • 1 x USB Digital Input
  • 1 x Power Input
  • Output Connectors 2 x 1/4″ Headphone Outputs (Front Panel)
  • 1 x Stereo 1/4″ Balanced Line Output (2 Jacks, L/R)
  • 1 x Stereo RCA Unbalanced Line Output (2 Jacks, L/R)
  • Maximum Input Level +22dBu, Balanced and Unbalanced
  • Maximum Output Level +22.5dBu, Unbalanced
  • +27dBu, Balanced
  • +20.4dBu, Headphone
  • Gain +15dB, Headphone Output
  • +14dB, Balanced Line Out
  • +11dB, Unbalanced Line Out
  • Frequency Response 4Hz – 600kHz @ 0dBu Out ±3dB
  • Impedance 106 kOhms, Balanced In
  • 53 kOhms, Unbalanced In
  • 95 Ohms, Balanced Out
  • 47.5 Ohms, Unbalanced Out
  • 1.2 Ohms, Headphone Out
  • THD + N <0.01% (+10dBu Out, 50 Ohm Load, SMPTE 4:1)
  • <0.008% (Headphone +10dBu Out, 50 Ohm Load)
  • <0.02% (Line Out +10dBu Out)
  • Input Attenuator < 0.05dB Channel Matching
  • 99.5dB Range
  • Function Controls 1 x Power Button
  • 1 x Level Control
  • 1 x Input Select Control
  • Dimensions 8.5 x 8.25 x 1.7″ (216 x 210 x 43mm)
  • Weight 5 lbs (2.2kg)

Additional information

Weight3 kg

Dalam proses.

Leave a Reply

Kategori Produk
Kategori Produk
Brands2216
Brands2216
AKG42
DBX17
G&L53
GHS22
JBL74
K&M21
LTD10
MXL13
PRS23
SKB17